Case Erector / Bottom Taper

Hot melt or pressure sensitive tape, the 300E 2- side positive case erector delivers consistent productivity. At all intervals in the case erection process the corrugate case is controlled. 2-side positive erection-securing both the major and minor panel, the 300E consistently forms the case to 90 degree square position. Rugged top and bottom mechanical drive shuttles continue to guarantee case squareness through the formation process. Heavy duty construction, 2-1/2” square tube (.188 wall) with a completely welded frame and only top quality electronic components ensures you of long-term return on your investment.

The 300E 2-side Positive Case Erector delivers consistent results even when corrugate case quality varies. Every element of system design promotes the positive handling of the corrugate case in the erection bottom sealing process - from magazine escape, 2-side erection, to top and bottom mechanical shuttle through the formation process.

Sequence of Operation:

A single flat blank is positively shuttled from the magazine storage and placed in takeaway position. A mechanical shuttle transfers the blank to the erection position. The case blank is secured on 2 sides (minor and major panels) by vacuum arms. The minor panel is moved to a 90 degree vertical position, erecting the case (case top opening is horizontal). Case bottom minor flaps are actively moved to closed position. Full flap length panels actuate to finish closing the case base major flaps. Erected case is advanced across tape head.

Utilities:

• AIR 220/3/60 NEMA 12 - 5CFM (80PSI)

Erector Options:

• Allen Bradley ML SLC 5/01
• Nordson 3400 Hot Melt Applicator
• Full Stainless Steel Construction
• Low Level Case Magazine Alert
• Electrical (480/3/60), (575/3/60)
• Left or Right Hand Operation

Standard Components:

• PLC (Omron CPM1A)
• Pneumatic (Norgren)
• Electrical (All UL Approved)
• Solenoids (115VAC)
• Dekka 22 Tape Head